Arkansas Restoration Inc.
5000 Northshore Ln, North Little Rock, AR 72118, United States
Arkansas Restoration Inc. appears in our mold remediation index for containment and protective equipment and water-damage drying and cleanup, with source notes to review before dispatch.
Public info · 79 / 100
From their Google Maps listing — not live status
Service map
From their public sources · not a guarantee
What this crew is documented to handle
01
Water source
Where the leak or moisture came from.
ON THEIR WEBSITE
02
Written report
Inspection notes before any work starts.
ASK ON THE CALL
03
Containment
PPE, HEPA filters, sealed work area.
ON THEIR WEBSITE
04
Testing
Air or surface samples to confirm cleanup.
ASK ON THE CALL
05
Certification
IICRC or restoration training.
ASK ON THE CALLEverything below comes from a public page
We pull from two sources: their own website and their Google Maps listing. Nothing is edited, made up, or paid for. If something looks wrong, tell us and we'll fix it.
| What | Detail | Where we got it | Confidence |
|---|---|---|---|
| Address | 5000 Northshore Ln, North Little Rock, AR 72118, United States | Google Maps | HIGH |
| Phone | +1 501-753-3600 | Google Maps | HIGH |
| Website | arkrestoration.com/ | Google Maps | HIGH |
| Safety equipment | Detected | Their website | HIGH |
| Water damage restoration | Detected | Their website | HIGH |
Four things worth confirming before they show up
Every mold job has the same four moving parts. The cells below show what this crew's public record actually mentions for each one. Anything we can't confirm is flagged "ask" — bring it up on the phone before scheduling.
Written inspection
Do they hand you a written scope, photos, and moisture readings before any demolition? Hard to compare bids without one.
Ask on the callPPE & containment
Respirators, sealed plastic barriers, HEPA air scrubbers, negative pressure. Without this, mold work just spreads spores around.
On their websiteWater cleanup
Do they handle the leak, drying, and mold all in one job — or pass the water side to a separate restoration company?
On their websiteTesting & sign-off
Air or surface samples to confirm the work actually cleared spore counts before you sign off and pay.
Ask on the call
What they handle
Based on their public listing
The kinds of jobs in their wheelhouse
Water damage and health-related mold concerns
Direct quotes — from them on the left, from customers on the right
Left column is what the company says about itself on its own pages. Right column is what reviewers wrote. Both are pulled straight from public sources — neither is endorsed by us.
From their website
Arkansas Restoration Inc. is indexed as a mold remediation provider in Little Rock, AR. Official-source signals mention containment and protective equipment and water-damage drying and cleanup. Before dispatch, ask how they document the scope, isolate the work area, handle moisture sources, and decide whether clearanc…
From their customers
No review snippets to show yet — check Google Maps for live reviews.
The four moves any competent crew should make
This is the playbook a good remediation crew runs on most home jobs. Use it as a yardstick when comparing bids — it's not specific to any one company.
Find the leak
Leak, slab seepage, plumbing failure, condensation — every mold job starts here. If the source isn't fixed, the mold will be back in months. Ask to see moisture-meter readings.
Seal off the room
Plastic barriers taped to the floor and ceiling, HEPA air scrubbers, negative pressure pulling air outside. Workers in respirators, you and your family out of the work zone.
Remove what's wet
Drywall, baseboards, carpet pad, soaked insulation — anything porous and contaminated comes out. Studs and framing get cleaned and dried, not always replaced.
Confirm it's clear
Moisture readings back to dry. Optional air or surface samples to confirm spore counts are down. Only then does rebuild start — never before.
OK to DIY
Visible spots under 10 square feet on hard, non-porous surfaces. Soap, water, gloves, open windows.
Sometimes DIY
Bathroom grout, small ceiling spots in well-ventilated rooms — but only after you've fixed the moisture.
Call a pro
More than 10 square feet, hidden in walls or HVAC, or following any flood. Containment really matters here.
Pro only — by law
Sewage backup (Category 3 water), drywall that might contain asbestos, or commercial buildings. Licensing required.
What mold tends to look like in Humid Subtropical climates
Humid Subtropical · AR
Where you liveLong warm seasons, summer rain, hurricane runoff. Moisture intrusion from wind-driven rain or storm surge is common — drying speed and hidden wall cavities matter most.
Humid Continental
For comparisonCold winters, freeze/thaw cycles, ice damming and basement seepage. Spring melt and summer humidity stack risk; older basements with limited vapor barriers are frequent triggers.
Mediterranean
For comparisonWet winters, dry summers, El Niño cycles. Slab-on-grade homes and stucco assemblies trap winter moisture; persistent fogbelt humidity along the coast adds to attic and crawlspace mold pressure.
Things homeowners usually want to know first
Is mold actually dangerous?
Mold can affect indoor air quality and aggravate allergies or asthma in some people, but symptoms vary from person to person. We avoid medical claims here — talk to your physician about exposure and ask the remediation crew about containment, not diagnosis.
How much does mold remediation cost?
Visible surface jobs can be a few hundred dollars; whole-home or hidden water-damage cases run into thousands. Cost depends on square footage, demolition needed, drying time, and whether testing is involved. Ask for itemized scope before any payment.
Can I do mold removal myself?
Small spots under 10 square feet on hard surfaces can usually be cleaned with detergent, water, and PPE. Larger areas, HVAC contamination, or any sewage involvement should go to a licensed remediation crew — improper DIY can spread spores into the rest of the building.
How long does professional remediation take?
A small project may finish in 1–2 days; complex water-damage jobs with structural drying, demolition, and clearance testing can take a week or longer. Drying time alone is often 3–5 days.
Do I need testing before or after the work?
Pre-testing helps confirm there is mold and identify type; post-remediation clearance testing verifies the area is back to acceptable spore counts. Many jobs only do clearance, but if the source is unclear, pre-testing pays off.
Will my homeowner insurance cover this?
Sudden water events (burst pipe, storm) are often covered; long-term moisture or neglect usually is not. Document the water source, dates, and any mitigation steps before filing. Each policy is different — call your carrier early.
Does this crew handle water extraction too?
Water-damage signals are present in this listing. Ask whether structural drying, demolition, and mold work are bundled, or whether a separate restoration company will be brought in.
More crews near here
See the full list →
Other mold remediation companies in AR
Little Rock, AR
SERVPRO of Little Rock, Cabot, Pine Bluff
SERVPRO of Little Rock, Cabot, Pine Bluff appears in our mold remediation index for containment and protective equipment and occupant-safety mentions, with sou…
Little Rock, ARABS Restoration Services, Inc.
In Little Rock, AR, ABS Restoration Services, Inc. shows remediation signals for written inspection or scope reports and containment and protective equipment.
Little Rock, ARChenal Restoration
Chenal Restoration appears in our mold remediation index for containment and protective equipment and occupant-safety mentions, with source notes to review bef…
Little Rock, ARPulaski County
In Little Rock, AR, Pulaski County shows remediation signals for containment and protective equipment and water-damage drying and cleanup.